Jump to content

As201354: Difference between revisions

From KittyWiki
No edit summary
No edit summary
Line 2: Line 2:
|+Anycast Nodes 2001:67c:8d4::/48
|+Anycast Nodes 2001:67c:8d4::/48
!ID
!ID
!Name
!Location
!Location
!Provider
!Provider
!Public /56 block
!Internal /64
|-
|-
|0
|1
|node1.route.as201354.net
|🇨🇭Zurich
|🇨🇭Zurich
|https://www.securebit.ch/
|https://www.securebit.ch/
|2001:67c:8d4:100::/56
|fd00:0:0:1::2/128
|-
|-
|1
|2
|
|🇩🇪Düsburg
|🇩🇪Düsburg
|https://www.securebit.ch/
|https://www.securebit.ch/
|2001:67c:8d4:200::/56
|fd00:0:0:1::3/128
|}
|}
Adding a new Node on master<syntaxhighlight lang="shell" line="1" start="1">/ip/firewall/filter add chain=input action=accept protocol=udp dst-port=9999 comment="Allow WG incoming"
/interface wireguard peers add interface=wg-internal \
    public-key="NODE_PUBLIC_KEY" \
    allowed-address=fd00:0:0:1::XXXX/128,2001:67c:8d4:XXXX::/56 \
    persistent-keepalive=25
/ipv6 route add dst-address=2001:67c:8d4:XXXX::/56 gateway=fd00:0:0:1::X</syntaxhighlight>Adding a new node on node<syntaxhighlight lang="shell">/ip/firewall/filter add chain=input action=accept protocol=udp dst-port=9999 comment="Allow WG incoming"
/interface wireguard add name=wg-internal mtu=1420 port=9999
/ipv6 address add address=fd00:0:0:1::XXXX/64 interface=wg-internal advertise=no
/ipv6 address add address=2001:67c:8d4:XXXX::1/56 interface=ether1
/interface wireguard peers add interface=wg-internal \
    public-key="MASTER PUBLIC" \
    endpoint-address=XXXXXXXX \
    endpoint-port=9999 \
    allowed-address=fd00:0:0:1::XXXX/128,2001:67c:8d4::/48 \
    persistent-keepalive=25</syntaxhighlight>Checking that it works<syntaxhighlight lang="shell">
# on master
/ping fd00:0:0:1::X interface=wg-internal 
/ping 2001:67c:8d4:XXXX::1
# on node
/ping fd00:0:0:1::1 interface=wg-internal
</syntaxhighlight>

Revision as of 22:39, 12 February 2026

Anycast Nodes 2001:67c:8d4::/48
ID Name Location Provider
1 node1.route.as201354.net 🇨🇭Zurich https://www.securebit.ch/
2 🇩🇪Düsburg https://www.securebit.ch/